An improved evaluation of the neutron background in the PandaX-Ⅱ experiment

In dark matter direct detection experiments,neutron is a serious source of background,which can mimic the dark matter-nucleus scattering signals.In this paper,we present an improved evaluation of the neutron background in the PandaX-II dark matter experiment by a novel approach.Instead of fully relying on the Monte Carlo simulation,the overall neutron background is determined from the neutron-induced high energy signals in the data.In addition,the probability of producing a dark-matter-like background per neutron is evaluated with a complete Monte Carlo generator,where the correlated emission of neutron(s)andγ(s)in the(α,n)reactions and spontaneous fissions is taken into consideration.With this method,the neutron backgrounds in the Run 9(26-ton-day)and Run 10(28-ton-day)data sets of PandaX-II are estimated to be(0.66±0.24)and(0.47±0.25)events,respectively.     

An Ultra-Long-Life Lithium-Rich Li1.2Mn0.6Ni0.2O2 Cathode by Three-in-One Surface Modification for Lithium-Ion Batteries

Voltage decay and capacity fading are the main challenges for the commercialization of Li-rich Mn-based layered oxides (LLOs). Now, a three-in-one surface treatment is designed via the pyrolysis of urea to improve the voltage and capacity stability of Li_1.2Mn_0.6Ni_0.2O₂ (LMNO), by which oxygen vacancies, spinel phase integration, and N-doped carbon nanolayers are synchronously built on the surface of LMNO microspheres. Oxygen vacancies and spinel phase integration suppress irreversible O₂ release and help lithium ion diffusion, while N-doped carbon nanolayer mitigates the corrosion of electrolyte with excellent conductivity. The electrochemical performance of LMNO after the treatment improves significantly; the capacity retention rate after 500 cycles at 1 C is still as high as 89.9 % with a very small voltage fading rate of 1.09 mV cycle⁻¹. This three-in-one surface treatment strategy can suppress the voltage decay and capacity fading of LLOs.     

Enantiodivergent [4+2] Cycloaddition of Dienolates by Polyfunctional Lewis Acid/Zwitterion Catalysis

Diels–Alder reactions have become established as one of the most effective ways to prepare stereochemically complex six-membered rings. Different catalysis concepts have been reported, including dienophile activation by Lewis acids or H-bond donors and diene activation by bases. Herein we report a new concept, in which an acidic prodiene is acidified by a Lewis acid to facilitate deprotonation by an imidazolium–aryloxide entity within a polyfunctional catalyst. A metal dienolate is thus formed, while an imidazolium–ArOH moiety probably forms hydrogen bonds with the dienophile. The catalyst type, readily prepared in few steps in high overall yield, was applied to 3-hydroxy-2-pyrone and 3-hydroxy-2-pyridone as well as cyclopentenone prodienes. Maleimide, maleic anhydride, and nitroolefin dienophiles were employed. Kinetic, spectroscopic, and control experiments support a cooperative mode of action. High enantioselectivity was observed even with unprecedented TONs of up to 3680.     

Manipulating the Click Reactivity of Dibenzoazacyclooctynes: From Azide Click Component to Caged Acylation Reagent by Silver Catalysis

Strain-promoted azide–alkyne cycloaddition using dibenzoazacyclooctyne (DBCO) is widely applied in copper-free bioorthogonal reactions. Reported here is the efficient acid-promoted rearrangement and silver-catalyzed amidation of DBCO, which alters its click reactivity robustly. In the switched click reaction, DBCO, as a caged acylation reagent, enables rapid peptide/protein modification after decaging facilitated by silver catalysts, rendering site-specific conjugation of an IgG antibody by a Fc-targeting peptide.     

Catalytic cross-coupling of aniline by pyrite and dissolved oxygen under alkaline conditions

Pyrite catalyzes oxidation of various organic contaminants by dissolved oxygen (DO) under acidic conditions; however, the catalytic mechanism under alkaline conditions is still not clear. In this study, we observe increased oxidation rates of aniline with increasing pHs (7.0–11.0). Electron paramagnetic resonance (EPR) analysis and quenching experiments rule out contributions of •OH, O₂^•−, ¹O₂ and Fe (IV) to aniline oxidation and suggest that the Fe (III)–OOH peroxo and/or H₂O₂ are the primary oxidative species in the oxidation of aniline at pH 11.0. In addition, 200 mg L⁻¹ H₂O₂ does not apparently increase the oxidation rate of aniline, which also rules out the predominant contribution of the produced H₂O₂ to aniline oxidation. We therefore suggest that the Fe (III)–OOH peroxo is indeed the primary oxidative species in the pyrite–DO system under alkaline conditions. Analyses of solid total organic carbon (TOC), gas chromatography–mass spectrometry and Fourier-transform infrared spectroscopy further reveal that more than 83.3% aniline has been polymerized to polyaniline, instead of being mineralized into CO₂ and H₂O, indicating that H-abstraction from aniline by the Fe (III)–OOH peroxo is an important step in the oxidation of aniline under alkaline conditions. This study provides new insight into the oxidative species in the pyrite–DO system, and opens a new door for organic degradations under alkaline conditions.     

Efficient structural modification of electron-withdrawing substituents on Pt(II) complexes for red emitters: A theoretical study

In this study, the electronic structures and optical properties of a cyclometalated Pt(II) complex (M1) and a series of derivatives (M1–F, M1–CF₃, and M1–CN) with electron-withdrawing substituents (–F, –CF₃, and –CN) at the carbazole moiety were theoretically investigated by density functional theory and time-dependent density functional theory. The calculation results reveal that these Pt complexes display deep red phosphorescence emission above Λ = 640 nm. When the ³MLCT/π → π* to triplet metal-centered ³MC/d–d state decay mechanism is taken into consideration, the nonradiative decay rate constant (k_nr) decreased in the order M1 > M1–CF₃ > M1–F > M1–CN. The <T₁|H_SOC|S_m> and kr values of M1-F are similar with those of M1, however the Knr rate ofM1-F is larger than that of M1. M1–F is expected to have improved quantum yields. Moreover, through the analyses of the HOMO/LUMO level and triplet energy, it is found that the introduction of –F and –CN substituents in M1 results in efficient energy transfer from the host material 4,4′-N,N′-dicarbazole-biphenyl to these complexes. In view of the electroluminescent applications in organic light-emitting diodes, M1–F can serve as efficient deep-red guest materials with improved electron injection and transport ability.     

A [001]-Oriented Hittorf's Phosphorus Nanorods/Polymeric Carbon Nitride Heterostructure for Boosting Wide-Spectrum-Responsive Photocatalytic Hydrogen Evolution from Pure Water

Red phosphorus is a promising photocatalyst with wide visible-light absorption up to 700 nm, but the fast charge recombination limits its photocatalytic hydrogen evolution reaction (HER) activity. Now, [001]-oriented Hittorf's phosphorus (HP) nanorods were successfully grown on polymeric carbon nitride (PCN) by a chemical vapor deposition strategy. Compared with the bare PCN and HP, the optimized PCN@HP hybrid exhibited a significantly enhanced photocatalytic activity, with HER rates reaching 33.2 and 17.5 μmol h⁻¹ from pure water under simulated solar light and visible light irradiation, respectively. It was theoretically and experimentally indicated that the strong electronic coupling between PCN and [001]-oriented HP nanorods gave rise to the enhanced visible light absorption and the greatly accelerated photoinduced electron–hole separation and transfer, which benefited the photocatalytic HER performance.     

Late-Stage Peptide Macrocyclization by Palladium-Catalyzed Site-Selective C−H Olefination of Tryptophan

Transition-metal-catalyzed C−H activation has shown potential in the functionalization of peptides with expanded structural diversity. Herein, the development of late-stage peptide macrocyclization methods by palladium-catalyzed site-selective C(sp²)−H olefination of tryptophan residues at the C2 and C4 positions is reported. This strategy utilizes the peptide backbone as endogenous directing groups and provides access to peptide macrocycles with unique Trp–alkene crosslinks.     

Tribological behaviors of DLC films in sulfuric acid and sodium hydroxide solutions

Tribological behaviors of three typical kinds of diamond-like carbon (DLC) films (a-C, a-C:Cr, and a-C:H) in sulfuric acid and sodium hydroxide solutions were investigated. The a-C film showed the lowest stable coefficients of friction (COF) in both sulfuric acid and sodium hydroxide solutions but the worst wear resistance in sulfuric acid solution. The a-C:H film showed the highest COF in sulfuric acid solution and the best wear resistance in both sulfuric acid and sodium hydroxide solutions. The a-C:Cr film exhibited superior comprehensive tribological performance in sulfuric acid solution, while in sodium hydroxide solution, high COF and very poor wear resistance was observed. What is more, friction and wear mechanism was revealed by investigating the friction-induced material evolutions on the sliding surface.     

On the Effect of Secondary Nucleation on Deracemization through Temperature Cycles

Herein, the pivotal role of secondary nucleation in a crystallization-enhanced deracemization process is reported. During this process, complete and rapid deracemization of chiral conglomerate crystals of an isoindolinone is attained through fast microwave-assisted temperature cycling. A parametric study of the main factors that affect the occurrence of secondary nucleation in this process, namely agitation rate, suspension density, and solute supersaturation, confirms that an enhanced stereoselective secondary nucleation rate maximizes the deracemization rate. Analysis of the system during a single temperature cycle showed that, although stereoselective particle production during the crystallization stage leads to enantiomeric enrichment, undesired kinetic dissolution of smaller particles of the preferred enantiomer occurs during the dissolution step. Therefore, secondary nucleation is crucial for the enhancement of deracemization through temperature cycles and as such should be considered in further design and optimization of this process, as well as in other temperature cycling processes commonly applied in particle engineering.